UNIDADE TESTE EVSE IEC 62196-2 TIPO 2

EVSE adapter IEC 62196-2 Type 2

Dedicated adapter for EVSE (Electric Vehicle Supply Equipment)
installation inspections, maintenance and troubleshooting
Compact adapter for complete testing of Mode 3 AC EVSE
-EVSE tests under various simulations
- CP State / PP State simulation
- CP Error / PE Error simulation
-Touch pad for PE voltage check
- L1, L2, L3, N, PE measuring terminals for electrical tests of EVSE
- CP signal terminals for CP signal monitoring
- Mains socket for load current test (MAX. 10A)
- CAT II 300V rating

Measurable tests by KEW 8602
CP state A, B, C, D
PP state OPEN, 13A, 20A, 32A, 63A
Terminal E, N, L1, L2, L3, CP
PE PRE-TEST OK
CP Error OK
PE Error OK
Mains socket 10/250V
Specification
Plug IEC 62196-2 Type 2
Rated voltage AC 250V Max.(Single-phase)
AC 430V Max.(Three-phase)
Rated Frequency 50/60Hz
Rated voltage/
current of mains socket AC 10A/250V
?8602(EU):Type E socket, 8602(UK):Type BF socket
Fuse rating AC 10A/250V, Ø5×20mm
Operating temp. & humidity range 0 - 40ºC, RH 80% or less (no condensation)
Storage temp. & humidity range -10 - 50ºC, RH 80% or less (no condensation)
Applicable standards IEC 61010-1 CAT II 300V, IEC 61010-2-030,
IEC 61851-1, IEC 60529 (IP40)
Altitude 2000m or less
Cable length Approx. 250mm
Dimensions Unit: 172(L) x 105(W) x 57(D) mm
Plug part: 175(L) x 60(W) x 53(D) mm
Weight Approx. 840g
Included Accessories 8930 (Fuse)
9202 (Carrying case)
Instruction manual
Optional Accessories 8603 (TYPE1 to TYPE2 conversion adapter)