Stringing GUN EZ-100 (50-150 MM)

Stringing GUN EZ-100 (50-150 MM)

ADVANTAGES
· big time-savings when pulling cables
· compact dimensions allow for
excellent accessibility even with
very tight clearance
· simple operation of the machine
· string roll of approx. 900 m
· lightweight and handy
· double functionality blowing and
sucking modus
· calibration rather not necessary
· fits in the trunk of every car
· thanks to time-savings an excellent
price / performance ratio

APPLICABLE FOR
. conduit diameter of 50 to 150 mm
. all commercial conduits

Intended Use
• for blowing in or sucking out a special pull line in all commercial pipe work of Ø int.
from 50 to 150 mm (replaces required compressor)
• for all network construction such as civil engineering, ground work, roads, tunnels, bridges etc.
• for all commercial output connections, ducts, pits etc., even with very tight clearance
• field experience up to 1000 m and more (Current record 3’280 m)
• for certain situation change to sucking mode and suck on the shuttle from the opposite end
• condensed water, surface water, small residues or impurities or else can often be
pushed through with the shuttle
• separate calibration rather not necessary

Functioning
• conduit ends must be cut off cleanly and evenly
• firstly, blow through the conduit without shuttle, check if penetrable tube/correct tube
• assemble shuttle corresponding exactly to the Ø int. of tube
• insert pull line through pull line supply and knot it tightly to the shuttle
• place shuttle in the conduit and press EZ-100 to the conduit, the front being movable for 360°
• blow shuttle through without interrupting (never without pull line, cannot be retrieved when stuck)
• attach either cable/s or extra strong pull line and start pulling

Stringing Gun EZ-100
Standard equipment in strong plastic case
• 2 pull line rolls d 1mm, tensile strength approx 24 kg, roll of approx 900 m
• 1 suction unit with foam collar
• 5 boxes with equipment to arrange 2 orange (dirt) and 2 blue (water) shuttles, included disks for
standard Ø int. of tube 50, 60, 80, 100 and 120 mm (for all other internal diameter on request)
• 1 box with all assembly material required for shuttles

Accessories (on separate order)
• Parachute for conduits with cables laid s
o Yellow (small) for 60 up to 100 mm
o Red (large) for 100 up to 150 mm
• Adapter black foam for conduits of diameters up to approx 160 mm
• Special equipment for smaller diameter, consisting of special black adapter plus special nozzle
for int. Ø of 25 to 50 mm
• Cone orange, int. conduit Ø from 50 to 120 mm, with metallic head, for difficult access or frayed
conduit end
• Special pull line of d 4 mm, tensile strength approx 210 kg, rolls of 1100 m