Name: LU STAR 127
Description: To control lighting systems for streets, outdoor stairways, display windows, entrances etc. Automatic switching on and off depending on the set lux value via the twilight switch.
Features:
    • Switching brightness can be continuously adjusted at the setting screw from approx. 2–200lLux
    • Undelayed indication of switching status through red luminous diode
    • Continuously adjustable ON/OFF delay to prevent faulty switching through lightning, headlights etc. from 2-100 s
    • Integrated light sensor with a very wide light-entry angle (approx. 180 degrees) and a specially shaped lens
    • Cable entry optionally at the bottom or back of the housing with two cables each possible. Quick-catch screws to shut the hinged top of the housing. 4 mm2
Technical Info:
    • Operating voltage : 220/230 V~, ±10 %
    • Frequency : 50/60 Hz
    • Power consumption : max. 4.5 VA
    • Brightness range : 2 - 200 lux
    • Switching delay : 2-100 sec.
    • Contact type : 1 x working contact
    • Switching status indication (no delay) : Red LED
    • Nominal current : 16A
    • channels: 1
    • degree of protection: IP55
    • Halogen lamps: 2300W
    • Incadescent lamp load: 2300W
    • Flurescent lamps (uncompensated): 2300VA
Design:
    • size: 85 x 118 x 50 mm
    • where to use: wall
English Manual English Document